Configuring A Password For Http Access - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

Configuring Passwords to Control Management Access to the Router

Configuring a Password for HTTP Access

To configure a password for Web access, complete these steps:

Select Passwords in the left navigation bar and scroll to the bottom of the

Add/Modify/Delete Users window.

Select the HTTP tab.

Figure 14-19. Configuring Passwords for Web Access

Select the Use local user list option if you want to use the usernames and

passwords configured in this list for access to the router's Web server.

(This is the default setting.)

If you want to use a RADIUS or TACACS+ server to control access to the

Web browser, then you must enable the AAA subsystem. See "Using the

AAA Subsystem to Control Management Access" on page 14-27 for

instructions on configuring these options.

Click Apply.

Using the Web Browser Interface for Basic Configuration Tasks

Table of Contents

Do you have a question about the ProCurve Secure 7000dl Series and is the answer not in the manual?