Configuring Authentication Using A Radius Server - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

Using the Web Browser Interface for Basic Configuration Tasks

Configuring Passwords to Control Management Access to the Router

Configuring Authentication Using a RADIUS Server

If you want to use a RADIUS server to authenticate users who access the

router, you must enable the AAA subsystem.

Select Passwords in the left navigation bar and scroll to the bottom of the

Add/Modify/Delete Users window.

In the Service Authentication section, select AAA Mode Enabled.

Click Apply to enable the AAA subsystem.

Configure the settings for a RADIUS server.

Select the Radius tab.

Figure 14-21. Configure the Settings for a RADIUS Server

b. For Address, enter the IP address of the RADIUS server.

For Shared Key, enter the shared key. Re-enter the key to confirm it.

d. For Username, enter and confirm the username that the router should

use to authenticate itself to the RADIUS server.

Table of Contents