HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual page 715

Figure 14-66.Configuring Dynamic DNS in the Configuration
Window for an IP Interface
2. Return to the Web browser interface.
3. Click IP Interfaces under Router/Bridge in the left navigation bar. (If you
have not yet configured the logical interface for the connection to the
Internet, you must do so. See "Configuring the Data Link Layer Protocol
for E1, T1, and Serial Interfaces" on page 14-46 or "Configuring Ethernet
Interfaces" on page 14-31. The interface must also have an IP address,
whether a dynamic address assigned by a connecting device or a static
address.)
4. The configuration window for the interface will display.
5. By default, Dynamic DNS is disabled. To enable the interface to report to
DynDNS when its IP address changes, click the arrow in the Dynamic
DNS box. From the pull-down menu that displays, choose the service for
which you have registered:
a. Choose DynDNS.org if you have selected Dynamic DNS services.
b. Choose DynDNS.org Static if you have selected Static DNS services.
c. Choose DynDNS.org Custom if you have selected Custom DNS
services.
Using the Web Browser Interface for Basic Configuration Tasks
DNS Services
14-93