HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual page 671

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

Configuring the Data Link Layer Protocol for E1, T1, and Serial Interfaces

Figure 14-35. IP Settings

10. Configure dynamic DNS, if needed. For more information about dynamic

DNS, see "Configuring Dynamic DNS" on page 14-91.

For Dynamic DNS, use the pull-down menu to select DynDNS.org,

DynDNS.org Static, or DynDNS.org Custom. Additional boxes are

displayed, allowing you to configure information about your account

with DynDNS.org.

b. For Dynamic DNS Hostname, enter the hostname required to register

the interface's IP address.

For Dynamic DNS Username, enter the username for your company's

account with DynDNS.org.

d. For Dynamic DNS Password, enter the password for your company's

account with DynDNS.org.

Secondary IP Settings

11. To configure secondary IP addresses for your PPP interface, click Add a

new Secondary IP Address. Then enter the IP address and subnet mask

in the boxes provided.

12. Click Apply to activate your configurations.

Using the Web Browser Interface for Basic Configuration Tasks

Chapters

Table of Contents

Do you have a question about the ProCurve Secure 7000dl Series and is the answer not in the manual?