HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual page 530

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

Bridging—Transmitting Non-IP Traffic or Merging Two Networks

If so desired, change the router's priority for becoming the root of the

spanning tree.

Syntax: spanning-tree priority <value>

The value can be from 0 to 63535.

If so desired, configure the cost of the connections on the router from the

logical interface for the connection.

Syntax: spanning-tree path-cost <value>

The cost can be from 1 to 63535. A higher cost lowers the chance that the

connection will be chosen. For example:

ProCurve(config-fr 1.1)# spanning-tree path-cost 60000

If a router interface connects to an edge device, configure the interface

as an edge port and enable the BPDU guard. Move to the logical interface

ProCurve(config-eth 0/1)# spanning-tree edgeport enable

ProCurve(config-eth 0/1)# spanning-tree bpduguard enable

For Frame Relay and ATM subinterfaces enter:

ProCurve(config-fr 1.1)# spanning-tree edgeport

ProCurve(config-fr 1.1)# spanning-tree bpduguard enable

Chapters

Table of Contents