Secondary Ip Settings; Ethernet Interface Statistics; Releasing/Renewing A Dchp Ip Address - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Using the Web Browser Interface for Basic Configuration Tasks
Configuring Ethernet Interfaces
C a u t i o n
14-34
b. For Dynamic DNS Hostname, enter the hostname you are registering
for the interface.
c. For Dynamic DNS Username, enter the username for your company's
account with DynDNS.org.
d. For Dynamic DNS Password, enter the password for your company's
account with DynDNS.org.

Secondary IP Settings

12. To set secondary IP addresses for your Ethernet interface, click Add a
new Secondary IP Address. Then enter the IP address and subnet mask
in the boxes provided.
13. Click Apply to save your configurations.

Ethernet Interface Statistics

You can view status information about the Ethernet interface at the bottom
of the Ethernet Configuration window. This display provides basic informa-
tion; for a more comprehensive readout, access the CLI and enter show
interface ethernet 0/<port> at the enable mode context.

Releasing/Renewing a DCHP IP Address

If the Ethernet interface receives its IP address from a DHCP server, the first
line of the Status for Ethernet section reports the DHCP address state. If the
interface has successfully received an address, this should display "Bound."
Next to "Bound" are the words Release and Renew highlighted in blue.
14. To release the current IP address, click Release.
15. To receive an IP address, click Renew. When the interface receives an
address, the DHCP field should display "Bound."
16. To clear the current statistics, click the Clear Statistics button.
17. This section does not display realtime information. To get updates, click
the Continuous Refresh button. Click the Stop Updates button to end the
continuous refresh.
Clicking the Continuous Refresh button requires the router to send continuous
updates. This consumes bandwidth and consumer router resources.