Updating The Boot Process - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

Appendix A: Configuring the Router to Boot

from Compact Flash

Updating the Boot Process

If your router was shipped before July 2005, your router can be updated to

boot, by default, from compact flash. Follow these steps:

Update the router Boot ROM to version J02_02A.biz or later.

Load and boot from the updated Boot ROM file (J02_02A.biz or later).

Make any necessary changes to the router's configuration and save the

running-config file.

ProCurve> enable

ProCurve# write memory

You now have a current startup-config in flash.

Rename the current software file to SROS.BIZ. The file name must be in

all capital letters.

Syntax: copy flash J0X_0X.biz flash SROS.BIZ

ProCurve# copy flash J03_01.biz flash SROS.BIZ

Copy the SROS.BIZ file and the startup-config file to compact flash. If you

are not currently using a compact flash card, go to step 6.

Syntax: copy flash startup-config cflash startup-config

Syntax: copy flash J0X_0X.biz cflash SROS.BIZ

Change the primary boot path to boot from compact flash first, and from

flash as a backup.

ProCurve# configure terminal

ProCurve(config)# boot system cflash SROS.BIZ flash SROS.BIZ

ProCurve(config)# boot config cflash startup-config flash startup-config

Table of Contents