HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual page 673

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

Configuring the Data Link Layer Protocol for E1, T1, and Serial Interfaces

Figure 14-36. Configuring Two-Way PAP Authentication

In the pull-down menu for Peer Authentication Type, select PAP or CHAP.

Enter the remote endpoint's username and password in the Peer Username

and Peer Password fields. For example, in Figure 14-36, the peer's user-

name is RouterB and its password is YYY. For CHAP the username should

be the peer's hostname.

Click Apply.

You also configure the local router to authenticate itself to the peer

although this is not necessary. (See "Configuring the Local Router to

Authenticate Itself to a Peer" on page 14-51.)

Configuring the Local Router to Authenticate Itself to a Peer

Select System > Physical Interfaces.

Choose the logical interface for the connection whose remote endpoint

requires the router to authenticate itself (for example, your ISP).

You will enter the PPP Config window. Move to Authentication Settings

in the PPP configuration for "ppp <interface number>" window.

Using the Web Browser Interface for Basic Configuration Tasks

Chapters

Table of Contents

Do you have a question about the ProCurve Secure 7000dl Series and is the answer not in the manual?