Configure An Atm Interface; Configure The Atm Subinterface - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

Configure an ATM Interface

Figure 14-47.Configuration for ATM Interface Window

12. Enter a description if you want to document information about the ATM

13. Click the Enabled box to activate the ATM interface.

14. Click Apply to save your changes to the startup-config.

15. In the Configured Permanent Virtual Circuits section, click the Add

button to begin configuring the permanent virtual circuit (PVC). The

Configuration for "atm <subinterface>" window is displayed.

Using the Web Browser Interface for Basic Configuration Tasks

Configuring ADSL Interfaces

Table of Contents