Routing Traffic To An Isp - HP ProCurve 7000dl Series Basic Management And Configuration Manual

IP Routing—Configuring Static Routes
Quick Start
11-32

Routing Traffic to an ISP

Configure a default route to the ISP router:
ProCurve(config)# ip route 0.0.0.0 /0 ppp 1
Syntax: ip route 0.0.0.0 /0 <subnet mask | /prefix length> <next hop A.B.C.D | forward-
ing interface ID> [track <name>] [<administrative distance>]
Again, you should specify the WAN interface as the forwarding interface so
that the route is still valid even if the IP address changes.