Using The Procurve Web Browser Interface - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Overview
Interface Management Options
1-12

Using the ProCurve Web Browser Interface

The ProCurve Web browser interface is organized into the following sections:
System
Router/Bridge
Firewall
VPN
Utilities
The System section of the interface contains general router functions. In this
section, you can:
configure WAN and LAN connections
configure IP services
enable the Dynamic Host Configuration Protocol (DHCP) and Domain
Name System (DNS) servers
set the router's hostname and add entries to the DNS host table
configure Link Layer Discovery Protocol (LLDP) settings
You can also click Getting Started to display a help menu, or select System
Summary to display information about the router. Click Physical Interfaces
for a list of interfaces (including status and type) on your router.
The Router/Bridge section allows you to configure the router's bridging and
routing functions. You can set a default gateway, configure the IP interfaces,
set up quality of service (QoS) maps and routing protocols, and add entries to
the route table. You can also configure the router to act as a bridge and
participate in a spanning tree.
The firewall wizard can be found in the Firewall section. Click Firewall
Wizard to open the wizard in a new window. The wizard guides you through
establishing policies for controlling access to your network. From the Fire-
wall section, you can also enable specific application-level gateways (ALGs)
and set protocol timeouts.
The VPN section includes a wizard that simplifies the process of configuring
an IPSec-compliant VPN. The VPN section eliminates the difficulty of remem-
bering the many commands necessary for configuring a VPN in the CLI. The
VPN section only appears in the Web browser interface if you have installed
an optional IPSec encryption module in the rear panel of your router.
You can perform most of your file maintenance in the Utilities section. Click
Configure to complete tasks such as saving, downloading, uploading, and
deleting files. You can also click Firmware to view information about your