Commands Available In The Basic, Enable, Or Global Configuration Mode Contexts; Basic Mode Commands; Clear; Enable - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Commands Available in the Basic, Enable, or Global
Configuration Mode Contexts
The ProCurve Secure Router OS permits you to use certain commands only
in specific modes. When you are managing the ProCurve Secure Router and
you try to use a command that is not supported from the current mode context,
you will receive an error message.
To help you become familiar with the Secure Router OS, the following sections
introduce the types of commands that are available in the three main modes:
basic, enable, and global configuration.

Basic Mode Commands

The basic mode commands include those discussed in the following sections.

Clear

These commands reset router operations or statistical records. Table 1-2
shows the clear commands available in basic mode context.
Table 1-2. Basic Mode Context clear Commands
Option
clear counters [<interface>]
clear event-history
clear host [<hostname> | *]
clear sip [location | user-registration]
clear user [console | ssh | telnet]

Enable

To begin managing the router in the enable mode context, enter:
Syntax: enable
Software Overview
Result
clears interface counters, such as the
number of packets transmitted and
received or errors detected
clears the event history log
deletes host table entries
clears local SIP information
detaches a user from a particular line
Overview
1-39