Viewing The Bridge Table - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

Bridging—Transmitting Non-IP Traffic or Merging Two Networks

Configuring Bridging

192.168.1.0 /25

192.168.1.1 -

192.168.1.127

Figure 10-3. Variable-Length Subnetting

Viewing the Bridge Table

The ProCurve Secure Router stores information about how to forward bridged

packets in a bridge table. To view the bridge table, move to the enable mode

context and enter:

Syntax: show bridge <group number>

For example:

ProCurve# show bridge 1

You must either enter show commands from the enable mode context or add

do to the command. For example, to view the bridge table from the global

configuration mode context, you would enter do show bridge.

The bridge table contains MAC addresses for hosts in the bridged network and

the interface through which the router connects to these hosts. It also displays

the age of the entry and the number of frames transmitted to and received

from the host. (See Figure 10-4.)

192.168.1.128 /25

192.168.1.128 -

192.168.1.254

Table of Contents