Web Access Configuration - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

To change the HTTPS Server Port, enter the desired port number in the

box. The default is 443.

To enable the router's Secure Copy Server, click the box.

10. To make the changes effective, click Apply. If you want to return to the

previously configured settings, click Cancel to reset to the defaults.

Web Access Configuration

By default, the timeout for the HTTP server is 10 minutes. If your HTTP

connection to the router is inactive for 10 minutes, you must log in again to

use the Web browser interface.

Figure 14-12.Web Access Configuration

To change the Inactivity Timeout, enter the number of hours, minutes,

and seconds in the boxes.

You can set the maximum number of concurrent connections to the Web

browser interface by entering the number in the Max Sessions: box.

To make the changes effective, click Apply. Click Cancel to reset to the

previously configured settings.

Using the Web Browser Interface for Basic Configuration Tasks

Enabling IP Services on the Router

Table of Contents

Do you have a question about the ProCurve Secure 7000dl Series and is the answer not in the manual?