Debug Radius Command; Troubleshooting The Tacacs+ Server - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

Number of packets sent:

Number of invalid responses:

Number of timeouts:

Average delay:

Maximum delay:

Figure 2-5. show radius statistics

debug radius Command

You can view debug messages about RADIUS servers in real time. From the

enable mode context, enter:

Syntax: debug radius

The RADIUS debug messages show the communication process with the

remote RADIUS servers, as shown below.

RADIUS AUTHENTICATION: Sending packet to 172.22.48.1 (1645).

RADIUS AUTHENTICATION: Received response from 172.22.48.1.

To end the debug messages, enter one of the following commands:

Syntax: no debug radius

You can display information about the authentication, authorization, and

accounting packets that the ProCurve Secure Router exchanges with the

TACACS+ server. From the enable mode context, enter:

Syntax: show tacacs+ statistics

Figure 2-6 shows the type of information displayed with this command.

Controlling Management Access to the ProCurve Secure Router

Troubleshooting AAA

Table of Contents

Do you have a question about the ProCurve Secure 7000dl Series and is the answer not in the manual?