Cable Routing Recommendations - HP A8800 Installation Manual

Figure 27 Connecting an optical fiber to an SFP module
Installing an FMT (optional)
The FMT is installed in a cabinet for winding redundant fibers between the router and other devices.
Confirm the following prerequisites:
The cabinet is attached.
•
The router is installed.
•
The installation involves the following materials:
FMT
•
M5×10 self-tapping screws (two screws for one FMT)
•
To install the FMT:
Align the FMT and the installation holes on the column of the cabinet.
1.
Use a Phillips screwdriver to attach each FMT with two M5×10 self-tapping screws.
2.
Figure 28 Installing the FMT

Cable routing recommendations

31