HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual page 770

Appendix B: Glossary
RIP Routing Information Protocol. A routing protocol that manages routing infor-
RJ-11 Registered Jack 11. A four- or six-wire connector used primarily to connect
RJ-45 Registered Jack 45. A modular 8-wire jack/connector used with copper cable
B-44
mation within a self-contained network such as a LAN or an interconnected
group of LANs. RIP is an older routing protocol, best suited for smaller
networks, that selects best routes based on lowest hop count. For more
information on RIP, see RFC 2453 (at http://www.ietf.org/rfc/rfc2453.txt).
telephone equipment in the United States. RJ-11 connectors are also used to
connect some types of local-area networks (LANs), although RJ-45 connectors
are more common.
1 6
Pin
1–2
3
1 6
4
5–6
RJ-11 Connector
having four twisted pairs.
RJ-11 Connector
Description
Unused
Ring
Tip
Unused