HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual page 95

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

You can also copy the Secure Router OS software from a compact

bootstrap# copy cflash <filename> flash [<filename>]

If your router uses the standard boot process, you should copy the new

software as SROS.BIZ to both the compact flash memory (if your router

uses a compact flash card) and the internal flash.

bootstrap# copy flash J04_01.biz cflash SROS.BIZ

bootstrap# copy flash J04_01.biz flash SROS.BIZ

Alternatively, you can enter the boot system command and specify the

new Secure Router OS software by entering:

Syntax: boot system [flash | cflash] <filename>

bootstrap# boot system flash J04_01.biz

This option, however, is not recommended because you must then enter

a new boot system command whenever you upgrade the router's soft-

Enter reload or boot to reboot the system.

A quicker and easier way to replace corrupted software is to make sure that

you have an uncorrupted backup copy of the Secure Router OS on compact

flash. If you have a compact flash card with the good copy of the Secure Router

OS, you only need to insert it into the router and boot it. Then copy the

uncorrupted version to flash and erase the corrupt version.

Chapters

Table of Contents