Packet-Switching Network - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

Configuring the Data Link Layer Protocol for E1, T1, and Serial Interfaces

Configuring the Logical Interface

Subscriber 1

Subscriber 2

Figure 6-5. A Frame Relay Network Dynamically Allocates Bandwidth.

Packet-Switching Network

Frame Relay transfers data through multiple nodes in a shared network using

packet switching. Frame Relay divides data into frames, and each frame

travels through the network individually, passing from one Frame Relay

switch to another in a non-fixed path, until the frames are reassembled at their

destination.

Although frames can take multiple and variable paths through a shared

network, two routers, which are identified by administratively assigned

circuit IDs, define the fixed endpoints to a permanent virtual circuit (PVC).

In a Frame Relay network, a PVC is a logical connection between two sites.

(See Figure 6-6.)

Transmitting an average of 640 Kbps

with bursts to 832 Kbps

Public Carrier's CO

Transmitting an average of 768 Kbps

with bursts to 900 Kbps

Table of Contents

Do you have a question about the ProCurve Secure 7000dl Series and is the answer not in the manual?