HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual page 659

Figure 14-27.Configure IP Settings
Dynamic DNS
8. Configure dynamic DNS, if needed. For more information about dynamic
DNS, see "Configuring Dynamic DNS" on page 14-91.
a. For Dynamic DNS, use the pull-down menu to select DynDNS.org,
DynDNS.org Static, or DynDNS.org Custom. Additional boxes are
displayed, allowing you to configure information about your account
with DynDNS.org.
b. For Dynamic DNS Hostname, enter the hostname required to register
the interface's IP address.
c. For Dynamic DNS Username, enter the username for your company's
account with DynDNS.org.
d. For Dynamic DNS Password, enter the password for your company's
account with DynDNS.org.
Secondary IP Settings
9. To configure secondary IP addresses for the PPP interface, click Add a
new Secondary IP Address. Then enter the IP address and subnet mask
in the boxes provided.
10. Click Apply to activate your configurations.
Using the Web Browser Interface for Basic Configuration Tasks
Configuring Ethernet Interfaces
14-37