Configuring A Router Interface As A Dhcp Client - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Dynamic Host Configuration Protocol (DHCP)
Quick Start
13-36
5. Configure other necessary settings such as servers and a domain name.
You can also assign the client a name.
Syntax: dns-server <DNS server A.B.C.D> <secondary DNS server A.B.C.D>
Syntax: netbios-name-server <WINS server A.B.C.D> <secondary WINS server
A.B.C.D>
Syntax: lease <days> <hours> <minutes>
Syntax: tftp-server <TFTP server A.B.C.D>
Syntax: ntp-server <NTP server A.B.C.D>
Syntax: timezone-offset <-12 to 12>
Syntax: client-name <name>
Syntax: domain-name <name>

Configuring a Router Interface as a DHCP Client

The following interfaces can take dynamic addresses:
Ethernet interfaces
Frame Relay subinterfaces
ATM subinterfaces
bridged PPP interfaces
You call fill in the settings for the interface on your router in Table 13-4.
Table 13-4. DHCP Client Settings
Configuration
interface
hostname
client ID
1. Move to the interface configuration mode context. For example:
ProCurve(config) int fr 1.101
Parameter
• <slot>/<port> (for
Ethernet)
• subinterface number (for
Frame Relay or ATM)
• interface number (for
bridged PPP)
Your Setting