Positioning A Graphic/Message - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 3
6. For a #10 envelope template you can add up to 4 graphics: 2 will be right justified and
two will be left justified.
7. If you try to add an image and there is not enough room, the system will display a mes-
sage telling you to either remove an existing image or change the size of the envelope.
8. To change the horizontal position of a graphic items, refer to Positioning a Graph-
ic/Message.
9. If during a mail run an envelope has the maximum number of images it can accommodate
and the size of the envelope decreases (for example during a WOW job), the graphics
and/or messages will be dropped in a specific sequence. Refer to How Markers are
Dropped/Added for the order in which the markers are dropped.

Positioning a Graphic/Message

You can move a graphic horizontally within the Transpromotional zone using the Position
buttons. These buttons allow you to move the graphic to the left or right. The allowed dis-
tance you can move a graphic depends on the envelope/tape size and the number of graph-
ics already in the zone. If you attempt to move the graphic more than the maximum allowed,
a warning is displayed.
1. When you select an image, a border appears around it and a dot appears on the left or
right depending on whether it is left or right justified.
2. Select the graphic you want to move. For this example, we select the right justified blue
graphic.
73
SV62250 Rev. G