Turning Off Spot Black (#2) Printing - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 9
11. Select Ink pad replaced on the touchscreen to confirm that the waste ink tray pad has
been replaced.
12. Select Done to return to the Home screen.

Turning Off Spot Black (#2) Printing

If the spot black (#2) ink cartridge is out of ink, a special Out of Ink warning will appear indi-
cating that printing mail has been disabled to avoid damage to the system.
You can turn spot black (#2) printing off, and can continue to print mail for 14 days. When the
period expires you will need to reactivate spot black (#2) printing by installing a new ink car-
tridge.
NOTE: If you do not install a new ink cartridge spot black (#2) printing will be disabled per-
manently. If you choose to permanently disable spot black (#2) printing, you can continue to
print your mail. However, a customer care representative will need to install a new printing
system at a cost to you if you wish to use spot black (#2) printing in the future.
To turn off spot black (#2) printing:
205
SV62250 Rev. G