Changing Or Adding A Text Message Or Return Address - Pitney Bowes Connect+ Series Operator's Manual

Postal inscriptions
Postal inscriptions are text printed on the envelope to identify to the Post Office which class of service
should be used. Inscriptions:
can be selected automatically by the system when the class is selected in Run Mail
l
can be specified manually if you wish to print a specific inscription
l
can be set to not print
l

Changing or Adding a Text Message or Return Address

To change or add a text message:
1. Ensure that the appropriate job is
2. Select anywhere within the envelope on the Run Mail screen. You can also select the Edit
envelope link.
3. Select the Text messages and Return addresses option from the list box on the left of the Edit
envelope screen.
4. You have several options available for displaying the available graphics. Refer to
Available Messages/Addresses
5. If there is no message/address currently displayed on the envelope, select one of the available
messages displayed on the Edit envelope screen. A check mark appears next to the message you
select.
6. To add a message, refer to
7. To create a new text message or return address, or to change the font or color of the message,
refer to Creating a New Message or Return
8. To change the position of the message, refer to
9. To remove the message/address, simply deselect it.
10. Select OK when you are done.
11. To verify that the envelope prints correctly,
Pitney Bowes Connect+ Series Operator Guide
open and selected on the
for details.
Adding a Message/Return
Address.
Positioning a Graphic/Text
print a sample
April, 2016
Run Mail screen.
Address.
Message.
piece.
Running mail
Viewing
Page 105 of 367