Enabling User Logins; Creating, Editing And Deleting Users; Creating A User - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 8

Enabling User Logins

Set up at least one user with a password to protect your system from unauthorized access.
1. Select the Settings button on the Home screen.
2. The Settings screen displays. Select System from the list on the left side of the screen.
3. Select Users.
4. On the User setup tab, select Enable user logins.... You will be prompted to create a user
with supervisor access rights.
a. Enter the user name and then select OK.
b. Enter the password and select OK.
c. Re-enter the password to confirm and select OK.
d. Select the Password hint field to add a password hint. Enter the hint and select OK.
e. Select OK once you have finished creating the user.
5. If you would like to add additional users, select Yes, create another user. If you do not
want to add any additional users at this time, select No, done creating users.
6. Select Done to return to the Home screen.

Creating, Editing and Deleting Users

You can create users as a security measure, to protect access to certain features and
l
functions.
Once you have created users, you can edit user settings including name, password and
l
password hint.
If you want to remove a user from the system you can delete the user.
l
NOTE: Supervisor access rights are required to create, edit or delete users.

Creating a User

Follow the steps below to add a new user to your system.
NOTE: Supervisor access rights are required to create a user.
170
SV62250 Rev. G