Checking Or Changing The Postage Amount On The Run Mail Screen; Key In Postage - Pitney Bowes Connect+ 1000 Operator's Manual

All envelopes are open flap and nested, or
l
Some envelopes are closed flap (No previously sealed envelopes).
l
6. Select OK.
7. Select Start to run the job, or Reload job to return to the previously saved version of the
job.

Checking or Changing the Postage Amount on the Run Mail Screen

The system calculates the postage amount based on the weight of the mail piece and the
class you selected for this job.
You can however override the amount of postage by selecting either the postage amount or
the Key in Postage button on the bottom of the Run Mail screen and typing in a different
amount.
If you save this job with the manually entered postage amount, the job will no longer contain
the class information so you will have to enter the postage value every time you run this job
again.
It is recommended that you save each job with a class so that when the postal and carrier
rates are updated, your job postage amount will also be automatically updated to reflect the
new rates.

Key in Postage

You can key in postage for any postal job.
NOTE: You cannot save any job that uses key in postage as the default job. The default job
must have a class selection so it will be automatically updated when postage rates change.
Using the Key in Postage screen:
1. Ensure that the appropriate job is open and selected on the Run Mail screen.
2. You can enter the postage amount by selecting the postage amount displayed, or by
selecting the Key in Postage button on the bottom of the screen.
3. Enter the postage amount and select OK.
SV62250 Rev. G
Connect+® Series Operator Guide
66