Printing Only A Graphic Ad - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 2
WEIGH-ON-THE-WAY® (W-O-W®), first piece only - Use this method for mail pieces
l
that are identical (same size and number of sheets). The system weighs the first piece of
mail to be fed and calculates the postage. The rest of the stack will be posted with the
same postage as the first piece.
Attached scale - Use this method if you do not know the weight of the piece of mail.
l
Manual weight entry - Use this method if you want to enter the weight of an item that you
l
weighed on a separate scale. This is useful for items that exceed the weight capacity of
the attached scale or mailings that are always the same weight.
Differential weighing - Use this method if you want to place all of the mail on the scale at
l
once, then remove and run each piece through the system. The system calculates the
postage for each piece of mail you remove from the scale and applies the postage to the
piece as it goes through the mailing system. For larger pieces of mail (large envelopes or
packages), you can use differential weighing to have the system automatically print a
tape every time you remove a piece of mail from the scale.
NOTE: WEIGH-ON-THE-WAY®, manual weight entry and differential weighing are
optional features.

Printing Only a Graphic Ad

You can create a job to print only non-postal elements like a graphic ad on a tape or envel-
ope. If your system uses accounting, a piece count will be retained for accounting reports.
Follow the steps below to create an ad only job. If you have already created an ad only job,
open the job and begin running mail.
1. Select the Options button on the Run Mail screen.
2. Select Create a new job... and then select Graphic ad only.
3. Select OK. A new job tab appears.
4. Add the graphic ad to the job.
5. Enter the envelope or tape quantity and then select Start or Tape.
6. To save the job, select the Save As link at the top of the screen.
7. Enter the job name and select OK.
34
SV62250 Rev. G