Viewing Intellilink® Settings - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 8
View the IntelliLink® connection parameters for your postage account.
l
Reset the factory settings (if necessary).
l
View and export the communications settings.
l
NOTE: Once exported, the communication setting information is used to set up the
SendSuite Xpress™ or Ascent™ interface.
Initiate Remote Assistance when instructed by a Pitney Bowes service representative.
l
To access these options, select the Settings button on the Home screen and then select
Internet & Network.
Viewing IntelliLink® Settings
This option allows you to view the connection parameters for your postage account. The Intel-
liLink® settings are viewed within the Settings application.
1. Select the Settings button on the Home screen.
2. The Settings screen displays. Select Internet & Network from the list on the left side of
the screen.
3. Select IntelliLink. The Postage by Phone postage account number, Distributor URL, and
Backup data center URL for the system are displayed. These fields are automatically pop-
ulated by Pitney Bowes.
If necessary, select a field, enter the parameter and select OK.
l
NOTE: Changes to the IntelliLink® parameters may result in errors when connecting
to Pitney Bowes.
If necessary, select the Reset to Factory Settings button to revert to the default values
l
for these fields.
4. Select Done to return to the Home screen.
Viewing and Exporting Communication Settings
This option allows you to view the communication settings for your system and export them
to a USB drive. The communication settings are viewed within the Settings application.
162
SV62250 Rev. G