Saving The Presortxtra Job - Pitney Bowes Connect+ 1000 Operator's Manual

Saving the PresortXtra Job

To save the PresortXtra settings as a job:
1. Once you have selected the PresortXtra settings, select Save As on the top of the Run
Mail screen. You are prompted to "Save as job name".
2. Select the keyboard icon and enter the job name. You can enter up to 16 alphanumeric
characters.
3. Select OK. The new job appears as a tab at the top of the Run Mail screen.
4. To save other PresortXtra jobs, simply select Carrier again as described in Setting Up the
PresortXtra Job and repeat the process.
5. Run a sample mail piece to verify that the proper inscription appears on the envelope or
tape.
6. To upload the single mail piece data, go to the Home screen and select the Settings but-
ton. The Settings screen displays.
a. Select System from the list on the left side of the screen.
b. Select Postal Information Upload.
c. Select Upload postal information now.
7. Fax the sample mail piece to the Mail Services Customer Center at 203-617-3939 and
call them at 1-866-624-5724 to let them know that the setup is complete.
8. Go to Running a PresortXtra Job.
SV62250 Rev. G
Connect+® Series Operator Guide
100