Viewing Available Messages/Return Addresses; Adding A Message Or Return Address - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 3

Viewing Available Messages/Return Addresses

1. Select anywhere within the envelope on the Run Mail screen. You can also select the
Edit envelope link.
2. Select the Text message and Return address option from the list box on the left of the
Edit envelope screen.
3. The messages are displayed in the order in which they have been created, with the new-
est appearing first.
4. If your system has full color capability there will be 3 color filter buttons located directly
under the image list.
By selecting one of the filter buttons you can choose to display only those messages that
are in color, mono (black), or postal red. If your system has a mono and postal red printer,
there will only be 2 filter option buttons. Systems having only the postal red printer do not
have any filter option buttons since all the messages/addresses are postal red.
5. A message/address which has a checkmark in front of it has been selected for placement
in the Transpromotional zone of the mail piece.

Adding a Message or Return Address

1. As soon as you open the Text message screen, text message markers appears at the top
of the transpromotional zone. The number of markers depend on the size of the envelope
or tape.
2. The example shown here corresponds to a # 10 envelope and has two Text message
markers. If graphic images are present, the markers are positioned between the graphic
83
SV62250 Rev. G