Running A Presortxtra Job - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 3
NOTE 1: The city and state that you are entering into the meter text should be the city
and state of the Presort Services Processing facility. If the city and state is too long it
can be substituted with the first three digits of the processing facility's zip code. For
example, Mailed at 061. If you are not certain what processing facility this customer will
be using you can contact the Mail Services Customer Center at 1-866-624-5724.
NOTE 2: The maximum number of characters you can enter on a text message line is
20.
e. Select OK when complete.
5. For more information on creating and editing messages, refer to Changing or Adding a
Text Message.

Running a PresortXtra Job

For more information on PresortXtr, refer to PresortXtra Service.
1. Select the PresortXtra job from the job tab on the top of the Run Mail screen. If the Pre-
sortXtra job does not appear there, select the Open a Job tab along the top of the screen
and select from a list of saved jobs. If you need to create a new PresortXtra job, refer to
Setting Up PresortXtra Service Jobs.
2. Clear the batch count for the PresortXtra job by selecting the Counter button at the bot-
tom of the Run Mail screen.
a. In the Postal Job counter dialog box, select Resettable. Resettable is the total
number of pieces run and the total postage amount since you reset the counter.
b. Select OK.
NOTE: Be sure and clear the batch counter between scheduled pickups.
3. Load envelopes and press the Start button, or if printing to tape, press the Tape button.
4. When complete, print the batch counter report:
a. From the Home screen, select the Reports button.
b. Select the Funds Reports.
c. Print the funds report on a tape or envelope.
99
SV62250 Rev. G