Chapter 2
Follow the steps below to create a seal only job. If you have already created a seal only job,
open the job and begin running mail.
1. Select the Run Mail button from the Home screen.
2. Select the Options button.
3. Select Create new job....
4. Select Seal only, no Printing.
NOTE: Print date is off in Seal only job.
5. Select OK. The job appears in a new job tab.
6. Select Start to begin feeding and sealing envelopes.
7. If you want to save this job, select Save as.
8. Enter the job name and select OK.
Counting Mail without Printing Postage
If your system uses accounting, you can create a job to count mail without printing postage.
The piece count will be included in accounting reports.
Follow the steps below to create a count only job. If you have already created a count only
job, open the job and begin running mail.
1. Select the Run Mail button from the Home screen.
2. Select the Options button.
3. Select Create new job....
4. Select Count only.
5. Select OK. The job appears in a new job tab.
6. Select the appropriate counter and then select OK.
Total - Count only: total number of pieces for the current job.
l
Resettable - Count only: the total number of pieces run since you reset the counter.
l
7. Select an account.
38
SV62250 Rev. G