Changing The Envelope Or Tape Quantity; Changing The Date - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 3
NOTE: When you select Key in Postage, the Class and Weighing method are set to none. If
you select a Class, the system automatically updates the postage amount appropriate to
the class you chose. It also sets the weighing method to match your system configuration
(for example, Attached Scale if you have a separate attached scale, or WEIGH-ON-THE-
WAY® (W-O-W®), or manual entry).

Changing the Envelope or Tape Quantity

Specifying the number of envelopes to print allows you to count down and stop the machine
after a certain number of pieces have been processed. For example, you might want to
remove a certain number from the stacker and place in a separate tray or bag.
To change the number of envelopes or tapes to print, toggle between the Envelope quantity
or Tape quantity tab on the Run Mail screen.
1. Ensure that the appropriate job is open and selected on the Run Mail screen.
2. Select the Envelope or Tape quantity tab on the Run Mail screen.
3. Select the envelope or tape Quantity box.
4. Select one of the preset quantities or enter a different number of envelopes or tapes.
Select OK.
NOTE: The maximum envelope quantity is 10,000. The maximum tape quantity is 100.
5. Select the Start button for envelopes, or Tape button for tapes. The system will stop once
it has processed the number of envelopes/tapes you specified.

Changing the Date

To change the format of the date, omit the date entirely, or to advance the date:
1. Ensure that the appropriate job is open and selected on the Run Mail screen.
2. Select anywhere within envelope on the screen or select the date value.
3. Select the Print Date option on the Edit envelope screen.
4. Select the appropriate date option:
67
SV62250 Rev. G