Pitney Bowes Connect+ 1000 Operator's Manual page 82

Make sure you have reviewed and are familiar with the Prerequisites for Using MyGraph-
ics™ Designer.
To run MyGraphics™ Designer:
1. From your PC, go to www.pb.com . Select My Account.
2. Enter your username and password, then select Log in. As soon as you log on, a "Con-
nect+ Anywhere" pop-up box displays. Close this pop-up.
3. Select MyGraphics™ Designer link on the Account page. This is located in the "Con-
nect+ Anywhere" list box on the left side of the Account page.
4. All of your mailing systems are displayed. Each one is identified by its base number
(PCN) and serial number. The base number and serial number are located on a label
placed on the feeder module on your machine, just to the right and under the display.
5. Select the checkbox in front of the unit(s) you want to contain the new graphic. To select
all units, select the checkbox "Select All". Select Next.
6. Read the "Terms of Use" and select the check box for "I agree to the terms and con-
ditions". You must agree to the terms in order to upload the new graphic.
7. Select the Start creating new My Graphics button.
8. Select the option button for the graphic type (Text only, or Image + Text). Select Browse
to import an image.
9. Select an image file from your PC. You can also select from a gallery of images provided
by MyGraphics Designer.
NOTE: The graphic or image (monochrome or color) file must be in one these formats:
BMP, JPG, GIF, or PNG. Each file can be up to 12Mbytes. GIF and PNG graphics that
contain transparency characters are not supported in MyGraphics. These characters
may display in an unpredictable manner, for example, the transparency character may
appear as black.
10. Enter a unique name (up to 20 characters) for your new graphic. Use only: a-z, A-Z, 0-9, '-
' (dash), '_' (underscore) or ' ' (Blank Space).
11. Select the desired graphic size. A graphic can be 0.5 to 6.0 inches in length. The max-
imum height is 7/8 inch.
Some of the possible locations for your graphics are shown here:
SV62250 Rev. G
Connect+® Series Operator Guide
78