Running Mail With The Di900™/Di950™ Inserting System Interface - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 3
c. To change the number of envelopes or tapes to print for this job, select the Envelope
or Tape link tab on the Run Mail screen.
4. To make changes to the envelope, or to the items that print on the envelope, select the
Edit envelope link on the Run Mail tab. This opens the Edit envelope screen.
5. To change the speed at which you process mail, select Machine speed from the Job Prop-
erties list box.
6. To preview the envelope, select the View full preview button at the bottom of the Edit
envelope screen.
7. To view other possible options (for example, to print a sample mail piece) select the
Options button at the bottom of the screen.
8. Load envelopes and press the Start button, or if printing to tape, press the Tape button.
More information:
a. If the message "Optimizing print quality..." displays, the system may be performing nor-
mal printer maintenance. Once complete, it will start printing.
b. If you have not loaded the envelopes onto the feeder, or if you need to add more mail
to the feeder, the Run Mail screen shows the message "Waiting for Envelope".
c. If after a certain time you have not loaded envelopes, the feeder will stop and the mes-
sage "Stopping..." is displayed.
9. As the system processes the mail pieces, it keeps track of the number of pieces and the
total postage amount. To check or clear the piece count, select the Counter button at the
bottom of the Run Mail screen
10. If an envelope or tape jams during printing, the system stops and displays the location of
the jam. Once you clear the jam you have to option of printing another envelope or tape.
11. To save any changes you have made to this job, select Save or Save as on the top of the
Run Mail screen.
Running Mail with the DI900™/DI950™ Inserting System Interface
The inserting system interface enables communication between DI900™/DI950™ FastPac®
inserting systems and Connect+® Series systems via an Ethernet/LAN connection. When
the inserting interface is in place, the inserter feeds mailpieces onto the Connect+® Ser-
iessystem feed deck for metering.
NOTE: Mail pieces must be sealed by the inserter.
53
SV62250 Rev. G