Postal Inscriptions; Changing Or Adding A Text Message Or Return Address - Pitney Bowes Connect+ 1000 Operator's Manual

Postal Inscriptions

Postal inscriptions are text printed on the envelope to identify to the Post Office which class
of service should be used.
Inscriptions:
Can be selected automatically by the system when the class is selected in Run Mail.
l
Can be specified manually if you wish to print a specific inscription.
l
Can be set to not print.
l

Changing or Adding a Text Message or Return Address

To change or add a text message:
1. Ensure that the appropriate job is open and selected on the Run Mail screen.
2. Select anywhere within the envelope on the Run Mail screen. You can also select the
Edit envelope link.
3. Select the Text messages and Return addresses option from the list box on the left of
the Edit envelope screen.
4. You have several options available for displaying the available graphics. Refer to View-
ing Available Messages/Addresses for details.
5. If there is no message/address currently displayed on the envelope, select one of the
available messages displayed on the Edit envelope screen. A check mark appears next
to the message you select.
6. To add a message, refer to Adding a Message/Return Address.
7. To create a new text message or return address, or to change the font or color of the mes-
sage, refer to Creating a New Message or Return Address.
8. To change the position of the message, refer to Positioning a Graphic/Text Message.
9. To remove the message/address, simply deselect it.
10. Select OK when you are done.
11. To verify that the envelope prints correctly, print a sample piece.
SV62250 Rev. G
Connect+® Series Operator Guide
82