Advancing The Date Automatically - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 8
Users: Use this feature to enable users on your system as well as create, edit and delete
l
users and assign access levels.
Configuration: Use this feature to view the status of rates, software, features, and graphic
l
updates on your system.
To access these options, select the Settings button on the Home screen and then select Sys-
tem.

Advancing the Date Automatically

If your mail is picked up at a certain time each day, you can set your system to advance the
date at the mail pickup time. Enter the time when you want the date to advance. As soon as
your system reaches the time you set, it automatically advances the date 24 hours and prints
that date on your postage.
NOTE: The date on the postage should correspond to the date when your mail goes to the
post office.
For example, if your mail goes to the Post Office at 3:00 PM each day, then set the date
advance to "03:00 PM". Any mail processed after 3:00 PM will have the date for the following
day printed on it. This ensures that the date printed on the mail piece corresponds with the
date it is brought to the Post Office.
Follow the steps below to advance the date automatically.
1. Select the Settings button on the Home screen.
2. The Settings screen displays. Select System from the list on the left side of the screen.
3. Select Automatic Date Advance.
4. Select Yes if you want the date to advance automatically. The time of day to advance
date fields appear.
5. Select the Hour : Minute field.
a. Enter the time (hour and minute) when you want the date advance to occur.
NOTE: The hour must be set using a 12 hour clock (i.e. 01 to 12). The minute must
be set from 00 and 59. If no value is entered in the minute box, it will be set to "00" by
164
SV62250 Rev. G