Moving Between Open Jobs; Saving Changes To A Job; Closing All Jobs - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 2

Moving Between Open Jobs

To quickly move between frequently used jobs, open the jobs and then select the job tabs as
necessary on the Run Mail screen.

Saving Changes to a Job

If you have made changes to a job, an asterisk appears next to the job name on the Run Mail
screen. You can save your changes to a job at any time. If you want to discard the changes
you've made, you can reload the previously saved version of the job.
To save your changes to the selected job, select Save.
l
To save your changes as a new job select Save as. Enter a new job name and then
l
select OK.
NOTE: If the selected job is a library job, you must select Save as and create a new job to
save your changes.

Closing All Jobs

Select Start over on the Run Mail screen to close all open jobs, discard all unsaved edits
made to saved jobs, discard all unsaved jobs and reload the default job.
NOTE: The Start over option does not allow you to save changes made to the default job.
40
SV62250 Rev. G