All About Jobs; About Job Properties - Pitney Bowes Connect+ 1000 Operator's Manual

All About Jobs

The Connect+™ Series allows you to save common jobs that can be recalled and easily
modified.
A job is a collection of settings you select and a name that are stored within the system's
memory for easy recall. A job can contain set values for such items as the account name,
postage amount, class, carrier, a special service, a mode such as Attached Scale or Dif-
ferential weighing, etc. If you run different kinds of mail, such as Sealed and Unsealed, you
may find it more convenient to create a job for each kind. These settings make the system
easy to learn – especially for the casual operator who does not consistently use a mailing
system.
The default job is the job you use to store your most commonly used system settings. These
are the settings your system will use whenever you restart your machine. After a certain
period of inactivity, or when you power up, the system restores the default job settings.
You can manage your jobs (create, edit, delete, rename, etc.) or select a job to process
l
mail against by selecting the Run Mail button on the Home screen.
You can view a master list of the jobs on your system, and the settings associated with
l
each job, by selecting the Jobs button on the Home screen.
Saved jobs are stored, and can be easily opened, edited, or deleted as necessary.

About Job Properties

All of the job properties for the current job are displayed in a list box on the left side of the
Run Mail screen. To view all of the job settings, select the down arrow below the list box. To
change any of the properties, select it.
If one of the job properties is required to run this job, it is displayed in red. For example, if the
job requires you to assign a class, Class Required appears in red in the list box.
The items appearing in the job properties list box depend on the job selected. If you have
selected a specific job type, or a library job, the available job properties are limited to those
options that apply specifically to the job type. For example, if the job is a Seal only, No print-
ing job, the list box only contains the sealer setting and the account selection (if available).
SV62250 Rev. G
Connect+® Series Operator Guide
27