Running Mail With A Combined Barcode Label Job - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 3
11. Save the job.
a. Select Save as.
b. Enter a new job name (e.g. ERR Job) and then select OK.
12. Select the Tape button to print a tape. To print postage on the piece of mail, select the
Start button.
NOTE: If you have accounting on your system, make sure you have selected an
account for this job or you will not be able to print postage.
13. Remove the piece of mail or package from the scale. Apply the tracking label, combined
barcode label and postage tape.
14. The system provides you with the option of automatically printing a receipt after every
mail piece. Select the appropriate option to continue.
15. The system will ask you if you want to track another package. Select No to complete the
job.

Running Mail with a Combined Barcode Label Job

Follow the steps below to run mail with a job that will allow you to scan the combined bar-
code label.
1. Place a piece of mail or package on the scale.
2. Open the combined barcode label job (e.g. ERR Job). If the job is already open, select
Reload.
3. Scan the next tracking label to be used.
4. Scan the combined barcode label. The Destination ZIP Code and Customer Reference
Number will appear in the Job Properties list box on the left side of the screen.
5. Select the Tape button to print a tape. To print postage on the piece of mail, select the
Start button.
NOTE: If you have accounting on your system, make sure you have selected an
account for this job or you will not be able to print postage.
6. Remove the piece of mail or package from the scale. Apply the tracking label, combined
barcode label and postage tape.
95
SV62250 Rev. G