Edge-Core ECS3510-28T Management Manual page 980

| Interface Commands
C 26
HAPTER
Interface Configuration
show interfaces
switchport
E
XAMPLE
Console#show interfaces status ethernet 1/1
Information of Eth 1/1
Basic Information:
Port Type
MAC Address
Configuration:
Name
Port Admin
Speed-duplex
Capabilities
Broadcast Storm
Broadcast Storm Limit
Multicast Storm
Multicast Storm Limit
Unknown Unicast Storm
Unknown Unicast Storm Limit : 64 kbits/second
Flow Control
VLAN Trunking
LACP
MAC Learning
Media Type
Current Status:
Link Status
Port Operation Status
Operation Speed-duplex : 100full
Up Time
Flow Control Type
Max Frame Size
MAC Learning Status
Console#
This command displays the administrative and operational status of the
specified interfaces.
S
YNTAX
show interfaces switchport [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
D S
EFAULT ETTING
Shows all interfaces.
C M
OMMAND ODE
Normal Exec, Privileged Exec
C U
OMMAND SAGE
If no interface is specified, information on all interfaces is displayed.
– 980 –
: 100BASE-TX
: 00-E0-0C-00-00-FE
:
: Up
: Auto
: 10half, 10full, 100half, 100full
: Enabled
: 64 kbits/second
: Disabled
: 64 kbits/second
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: Copper forced
: Up
: Up
: 0w 0d 1h 11m 2s (4262 seconds)
: None
: 1518 bytes (1522 bytes for tagged frames)
: Enabled