N
using twisted-pair cabling. Power-savings mode on a active link only works
when connection speed is 1 Gbps, and line length is less than 60 meters.
E
XAMPLE
This command shows the configuration settings for power savings.
show power-save
S
YNTAX
C
Privileged Exec
E
XAMPLE
Power savings can only be implemented on Gigabit Ethernet ports
:
OTE
Console(config)#interface ethernet 1/28
Console(config-if)#power-save
Console(config-if)#
show power-save [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
M
OMMAND
ODE
Console#show power-save interface ethernet 1/28
Power Saving Status:
Ethernet 1/28 : Enabled
Console#
– 993 –
| Interface Commands
C
26
HAPTER
Power Savings