Edge-Core ECS3510-28T Management Manual page 370

| Security Measures
C 13
HAPTER
Access Control Lists
S
HOWING
ACL H
ARDWARE
C
OUNTERS
Use the Security > ACL > Configure Interface (Show Hardware Counters)
page to show statistics for ACL hardware counters.
CLI R
EFERENCES
"show access-list" on page 966
◆
"clear access-list hardware counters" on page 965
◆
P
ARAMETERS
These parameters are displayed:
◆ Port – Port identifier. (Range: 1-28/52)
Type – Selects the type of ACL.
◆
Direction – Displays statistics for ingress.
◆
ACL Name – The ACL bound this port.
◆
◆ Action – Shows if action is to permit or deny specified packets.
Rules – Shows the rules for the ACL bound to this port.
◆
Time-Range – Name of a time range.
◆
Hits – Shows the number of packets matching this ACL.
◆
Clear Counter – Clears the hit counter for the specified ACL.
◆
W I
EB NTERFACE
To show statistics for ACL hardware counters:
Click Security, ACL.
1.
Select Configure Interface from the Step list.
2.
Select Show Hardware Counters from the Action list.
3.
Select a port.
4.
Select ingress or egress traffic.
5.
6. Due to a hardware limitation, statistics are only displayed for permit rules.
– 370 –
6