Edge-Core ECS3510-28T Management Manual page 822

| Authentication Commands
C 2 3
HAPTER
AAA
accounting dot1x
accounting
commands
E
XAMPLE
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#
This command applies an accounting method for 802.1X service requests
on an interface. Use the no form to disable accounting on the interface.
S
YNTAX
accounting dot1x {default | list-name}
no accounting dot1x
default - Specifies the default method list created with the
accounting dot1x
list-name - Specifies a method list created with the
dot1x command.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Interface Configuration
E
XAMPLE
Console(config)#interface ethernet 1/2
Console(config-if)#accounting dot1x tps
Console(config-if)#
This command applies an accounting method to entered CLI commands.
Use the no form to disable accounting for entered CLI commands.
S
YNTAX
accounting commands level {default | list-name}
no accounting commands level
level - The privilege level for executing commands. (Range: 0-15)
default - Specifies the default method list created with the
accounting commands
list-name - Specifies a method list created with the
commands command.
D S
EFAULT ETTING
None
– 822 –
command.
command.
aaa
aaa accounting
aaa
aaa accounting