Edge-Core ECS3510-28T Management Manual page 390

| Security Measures
C 13
HAPTER
Configuring 802.1X Port Authentication
C
ONFIGURING
P S
ORT UPPLICANT
S 802.1X
ETTINGS FOR
W I
EB NTERFACE
To configure port authenticator settings for 802.1X:
Click Security, Port Authentication.
1.
Select Configure Interface from the Step list.
2.
Click Authenticator.
3.
Modify the authentication settings for each port as required.
4.
Click Apply
5.
Figure 212: Configuring Interface Settings for 802.1X Port Authenticator
Use the Security > Port Authentication (Configure Interface – Supplicant)
page to configure 802.1X port settings for supplicant requests issued from
a port to an authenticator on another device. When 802.1X is enabled and
the control mode is set to Force-Authorized (see
Port Authenticator Settings for 802.1X" on page
configure the parameters for the client supplicant process if the client must
be authenticated through another device in the network.
CLI R
EFERENCES
"802.1X Port Authentication" on page 840
◆
– 390 –
"Configuring
386), you need to