Displaying Igmp Snooping Statistics - Edge-Core ECS3510-28T Management Manual

W
EB
To show multicast groups learned through IGMP snooping:
Click Multicast, IGMP Snooping, Forwarding Entry.
1.
Select the VLAN for which to display this information.
2.
Figure 364: Showing Multicast Groups Learned by IGMP Snooping
Use the Multicast > IGMP Snooping > Statistics pages to display IGMP
D
ISPLAYING
snooping protocol-related statistics for the specified interface.
IGMP S
NOOPING
S
TATISTICS
CLI R
"show ip igmp snooping statistics" on page 1212
◆
"clear ip igmp snooping statistics" on page 1209
◆
P
ARAMETERS
These parameters are displayed:
VLAN – VLAN identifier. (Range: 1-4094)
◆
Port – Port identifier. (Range: 1-28/52)
◆
Trunk – Trunk identifier. (Range: 1-16)
◆
Query Statistics
Querier IP Address – The IP address of the querier on this interface.
◆
Querier Expire Time – The time after which this querier is assumed to
◆
have expired.
General Query Received – The number of general queries received
◆
on this interface.
I
NTERFACE
EFERENCES
– 623 –
| Multicast Filtering
C 17
HAPTER
Layer 2 IGMP (Snooping and Query for IPv4)