Edge-Core ECS3510-28T Management Manual page 819

D
EFAULT
Accounting is not enabled
No servers are specified
C
OMMAND
Global Configuration
C
OMMAND
This command runs accounting for Exec service requests for the local
◆
console and Telnet connections.
Note that the default and method-name fields are only used to
◆
describe the accounting method(s) configured on the specified RADIUS
or TACACS+ servers, and do not actually send any information to the
servers about the methods to use.
E
XAMPLE
Console(config)#aaa accounting exec default start-stop group tacacs+
Console(config)#
This command enables the sending of periodic updates to the accounting
aaa accounting
server. Use the no form to restore the default setting.
update
S
YNTAX
aaa accounting update [periodic interval]
no aaa accounting update
D
EFAULT
1 minute
C
OMMAND
Global Configuration
C
OMMAND
◆ When accounting updates are enabled, the switch issues periodic
interim accounting records for all users on the system.
group - Specifies the server group to use.
radius - Specifies all RADIUS hosts configure with the
server host command.
tacacs+ - Specifies all TACACS+ hosts configure with the
tacacs-server host command.
server-group - Specifies the name of a server group configured
with the aaa group server
S
ETTING
M
ODE
U
SAGE
interval - Sends an interim accounting record to the server at this
interval. (Range: 1-2147483647 minutes)
S
ETTING
M
ODE
U
SAGE
– 819 –
| Authentication Commands
C 23
HAPTER
command. (Range: 1-64 characters)
AAA
radius-