Edge-Core ECS3510-28T Management Manual page 380

| Security Measures
C 13
HAPTER
Filtering IP Addresses for Management Access
You can delete an address range just by specifying the start address, or
◆
by specifying both the start address and end address.
P
ARAMETERS
These parameters are displayed:
Mode
◆
Web – Configures IP address(es) for the web group.
■
SNMP – Configures IP address(es) for the SNMP group.
■
Telnet – Configures IP address(es) for the Telnet group.
■
All – Configures IP address(es) for all groups.
■
◆ Start IP Address – A single IP address, or the starting address of a
range.
End IP Address – The end address of a range.
◆
W I
EB NTERFACE
To create a list of IP addresses authorized for management access:
Click Security, IP Filter.
1.
Select Add from the Action list.
2.
Select the management interface to filter (Web, SNMP, Telnet, All).
3.
Enter the IP addresses or range of addresses that are allowed
4.
management access to an interface.
Click Apply
5.
Figure 207: Creating an IP Address Filter for Management Access
– 380 –