Table 119: Atc Commands - Edge-Core ECS3510-28T Management Manual

Edge-core 28/52-port fast ethernet layer 2 switch
Table of Contents

Advertisement

A
T
UTOMATIC
RAFFIC
E
XAMPLE
The following shows how to configure broadcast storm control at 600
packets per second:
Console(config)#interface ethernet 1/5
Console(config-if)#switchport broadcast packet-rate 600
Console(config-if)#
R
C
ELATED
OMMANDS
storm-sample-type (1021)
show interfaces switchport (980)
C
C
ONTROL
OMMANDS
Automatic Traffic Control (ATC) configures bounding thresholds for
broadcast and multicast storms which can be used to trigger configured
rate limits or to shut down a port.

Table 119: ATC Commands

Command
Function
Threshold Commands
auto-traffic-control
Sets the time at which to apply the control
apply-timer
response after ingress traffic has exceeded the
upper threshold
auto-traffic-control
Sets the time at which to release the control
release-timer
response after ingress traffic has fallen beneath
the lower threshold
auto-traffic-control
Enables automatic traffic control for broadcast
*
or multicast storms
auto-traffic-control
Sets the control action to limit ingress traffic or
action
shut down the offending port
auto-traffic-control
Sets the lower threshold for ingress traffic
alarm-clear-threshold
beneath which a cleared storm control trap is
sent
auto-traffic-control
Sets the upper threshold for ingress traffic
alarm-fire-threshold
beyond which a storm control response is
triggered after the apply timer expires
auto-traffic-control
Automatically releases a control response
auto-control-release
auto-traffic-control
Manually releases a control response
control-release
SNMP Trap Commands
snmp-server enable
Sends a trap when broadcast traffic falls
port-traps atc
beneath the lower threshold after a storm
broadcast-alarm-clear
control response has been triggered
snmp-server enable
Sends a trap when broadcast traffic exceeds the
port-traps atc
upper threshold for automatic storm control
broadcast-alarm-fire
– 1023 –
| Congestion Control Commands
C
29
HAPTER
Automatic Traffic Control Commands
Mode
GC
GC
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecs3510-52t

Table of Contents