Edge-Core ECS3510-28T Management Manual page 351

Figure 185: Setting the Name of a Time Range
To show a list of time ranges:
Click Security, ACL.
1.
Select Configure Time Range from the Step list.
2.
Select Show from the Action list.
3.
Figure 186: Showing a List of Time Ranges
To configure a rule for a time range:
Click Security, ACL.
1.
Select Configure Time Range from the Step list.
2.
Select Add Rule from the Action list.
3.
Select the name of time range from the drop-down list.
4.
Select a mode option of Absolute or Periodic.
5.
Fill in the required parameters for the selected mode.
6.
Click Apply.
7.
– 351 –
| Security Measures
C 13
HAPTER
Access Control Lists